Skip to content Skip to sidebar Skip to footer

How To Reset Waste Ink Counter For Canon Printers BJC Series

Methode Reset Waste Ink Counter for Canon Printers BJC series

Methode Reset Waste Ink Counter for Canon Printers BJC series

Canon BJ-30 BJC-35v BJC-70 Printers reset methode (F14 Error Reset)
  • Unplug adapter
  • Hold POWER
  • Plug in ADAPTER
  • Release POWER after printer starts
  • Hold FF and MENU and press POWER
  • Release after beeps
  • Press <> Cartridge until 1A is displayed
  • Press ONLINE
  • Press POWER to shutoff printer
  • Unplug printer then re-plug printer
Canon BJC-50, BJC-55, BJC-80, BJC-85, Printers Waste Ink Tank Counter Reset Methode
  1. Unplug Power Cord
  2. Hold POWER and RESUME buttons
  3. Plug in Power Cord
  4. Release buttons after the printers starts up
  5. Hold CARTRIDGE and RESUME
  6. Press POWER
  7. Release all buttons after the beeps
  8. Press CARTRIDGE 16 times
  9. Press RESUME
  10. Unplug the Power cord
Canon Printers BJC-210 BJC-240 BJC-250 BJC-255 BJC-265BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650 Waste Ink Reset
  • Unplug Power Cord
  • Hold POWER and RESUME buttons
  • Plug in Power Cord
  • Release buttons
  • Open front door of printer
  • Hold the CARTRIDGE and RESUME buttons
  • Press POWER
  • Release all buttons after the beeps
  • Press CARTRIDGE once
  • Press RESUME
Canon BJC-600 BJC-600e BJC-610 BJC-620 Printers
  1. Unplug Power Cord
  2. Hold POWER and FF and Print Mode buttons
  3. Plug in Power Cord
  4. Release after the beeps
Canon BJC-2000 BJC-2100 Printers Waste Ink Counter Reset
  • Remove the Cartridge
  • Unplug the AC Power Cord
  • Close Front access panel
  • Hold down the RESUME/RESET button and plug in the AC power cord
  • Release RESUME/RESET after plugging in the AC Power cord.
  • Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
  • Press and HOLD RESUME/RESET for two seconds or more and release it.
  • Press and HOLD RESUME/RESET for two seconds or more and release it.
  • Unplug AC Power Cord to set data.
Canon BJC-5000 Waste Ink Counter Reset
  1. Power off printer
  2. Press and hold RESUME then press POWER, The indicator will start blinking.
  3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
  4. When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
  5. Press Power to set data
Service Test Print
  • Power off printer
  • Press and hold RESUME then press POWER, The indicator will start blinking.
  • While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
  • When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
  • Press Power to Print
Nozzle Print
  • Power off printer
  • Press and POWER, until the printer beeps and release.
Demonstration Print
  • While the printer in ON, Press and hold RESUME until the printer plays a melody of beeps.
Manual Service for Canon BJC-5100 Printes to Reset Waste Ink Counter
Self Test
  • Switch Printer off. Hold Power for 1 beep.
Waste Counter Reset Canon BJC-5100
  1. Power off printer
  2. Press and hold RESUME then press POWER, The indicator will start blinking.
  3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
  4. When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
  5. Press Power to set data
Service Test Print Canon BJC-5100
  • Power off printer
  • Press and hold RESUME then press POWER, The indicator will start blinking.
  • While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
  • When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
  • Press Power to Print
Nozzle Print Canon BJC-5100
  1. Power off printer
  2. Press and POWER, until the printer beeps and release.
Demonstration Print
  • While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
Canon BJC-3000, BJC-6000, BJC-6100, BJC-6200, BJC-7000, BJC-7100, BJC-8000 Printers
  1. Power off printer
  2. Hold Resume button then press and hold POWER, the beeper will sound once.
  3. Hold POWER and release RESUME
  4. Press RESUME twice
  5. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
  6. Press Power to set data